Für das Wake On Lan Tool steht das Update 2.0.2.5 zur Verfügung. Folgende Neuerungen sind enthalten:
- Spalten können nun beliebig sortiert und vergrößert werden. Die Position/Größe der Spalte wird gespeichert.
- Das WOL2 Fenster merkt sich seine Position und seinen Status.
- WOL via TCP/IP Option wurde entfernt. (Die Option war nur für WOL via Internet gedacht, jedoch nie aktiv. Die verwaisten Einstellungen sind nun weg.)
- Pro host kann nun der MagicPacket Sendemodus eingestellt werden. (Broadcast, NetCast oder Direkt.)
- IP Adressen von DHCP Hosts werden automatisch aktualisiert. (Es wird immer die IPv6 sowie die erste IPv4 DNS Adresse ermittelt.)
- Ein Fehler in der Timer-Verwaltung wurde behoben. Damit tritt das Problem von sporadisch gestarteten Rechnern nicht mehr auf.
- Nach dem CSV Im-/Export sind die Dateien nun geschlossen und können verschoben / gelöscht werden.
- MSI Installationspaket (Signiert) verfügbar!
// EN: The wake on lan tool was updatedto version 2.0.2.5!
- You can now move / resize the columns in the detail view as you like. They are saved on exit and restored on startup. The feature to automatically adapt the column width to its content has been disabled as this was working against the manual sizing. If you want to autosize a column, double click the separator right to the column.
- Removed (the permantly disabled) WOL via TCP option. WOL via TCP only makes sense for „direct“ communication (WOL over internet), as TCP only works if the destination is online. It has the same result as WOL over UDP, therefore it is now removed.
- Added a new host attribute: WOL Mode. You can now overwrite the default WOL Mode (Broadcast, NetCast, Direct) per host.
- Added a feature to automatically update the IP addresses of DHCP hosts. The IP address is updated to the one that sends the ICMP reply. If IPv6 is enabled and the reply is received from an IPv6 address the tool will try to additionally update the IPv4 address. (The first address returned by the DNS will be used, see the log file for warnings!)
- The window position and state (maximized, minimized, normal, systray) is saved on exit and restored on startup.
- Fixed a bug where timers fired although they were disabled. (The timer itself had to be enabled, if so it would fire for all weekdays, even for those where it was not enabled.)
- CSV Im/Export: The files are now properly closed.
- Signed MSI setup available!
Marko Oette's Blog 
Hi, can somebody help me with setting wol over internet in IPv6?
That might be a hard job to do if you do not know if the ipv6 packets are routed correctly.
What hardware (routers, switches, internet connection) do you have?
Hi, thank you very much for answer.
There are 3 PC’s, which I want to wake up, in the same ISP as me, but in different location (10 km)..
Connection to ISP is wifi 5 GHz. Network is built up on mikrotik routerboards (I think) – I have one on my roof.
On my side is not IPv6 connection. I use Teredo, I can ping on this machines if they are switched on and I can remotely controll them by RDP.
I’m not sure if the packages will be routed correctly over the internet already.
Why don’t you use IPv4?
I can ping on my subnet IPv6 addres – I think it is address of mikrotik.
When I use the subnet IPv6 address in our programme, the programme says „online“.
I have no public IPv4 address.
Unse a dynamic dns service for that.
Thanks, I must read about it.
I cannot configure router. Router is managed by ISP.
I will see if it is possible to wake up one of PC’s automaticly in some time. If it si possible I can wake up other through him.
I want to use remote control to service of these PC evening, because from morning to evening they work there.
Hallo,
seit heute teste ich wol2 mit xp home. Das Fernstarten einen PCs klappt, das Herunterfahren leider nicht. An die Gruppenrichtlinien des Zielpcs komme ich nicht heran. Gibt es dafür Tipps?
Sie sollten ein anderes Programm, zum Herunterfahren von Windows XP Home suchen und in Wol2 als Tool einbinden.
Die eingebaute Funktion verlässt sich darauf, dass die Windows Funktionen zur Verfügung stehen.